I&C Engineer

Mark Lerman Contact Information: Address: 2919 State Court Suwanee, GA. 30024 Telephone: 770-841-2257 E-mail: marklerman@msn.com Personal Objective: To obtain an Engineer’s position that demands a diverse background with in-depth experience to fully utilize my skills in a challenging and professional environment. Background Summary: Solid engineering knowledge and extensive practical experience in the following areas:  Multiple engineering disciplines including electrical machinery design, instrumentation and control system, mechanical engineering.  Experience in various industrial applications including: Power Plant, Oil, Gas, Chemical Process, LNG, Wastewater Treatment, and Pharmaceutical.  Distributed power controls, environmental controls.  Gas Turbine and Steam Turbine design and operation.  Proficient computer skills including design and simulation tools, standard documentation and communication tools.  Strong written and verbal communication skills, presentation skills. Experience: I&C Engineer CH2M HILL / Lockwood Greene Engineering/Atlanta, Ga March 2007 to January 2010 January 2005 to March 2006 May1999 to August 2002  Instrumentation specifications. Performed support engineering through the creation and maintenance of an instrumentation database and through development of installation details, plot plans, wiring documentation, electrical schematics, and relay panel wiring diagrams.  Design, sizing, and requisition of process instrumentation, product & environmental analyzers, control valves and pressure safety relief devices.  Reviewed, verified and QA checked vendor packages. I&C Engineer Ames / Atlanta, Ga March 2006 to February 2007  Instrumentation & control system design: instrumentation specifications, control system circuits from field instruments into distributed control system (DCS) cabinets.  Design and implementation of control circuits, cables, junction boxes, control panel enclosures, cable schedule, creation and maintenance of supporting instrumentation databases and Instrumentation installation.  Reviewed, verified and QA checked vendor packages. I&C Engineer CBI/Chicago, IL, March 2004 to July 2004. CBI/Taylor,Tx August 2004 to December 2004  Control system design, control circuits, cables, junction boxes, control panel enclosures, electrical schematics, relay panel wiring diagrams and line/three line diagrams.  Creation and maintenance of supporting instrumentation databases.  Power distribution and calculation, architecture diagrams and propagating control system circuits from field instruments into distributed control system (DCS) cabinets.  Design, sizing, specification and requisition of process instrumentation, product & environmental analyzers, control valves and pressure safety relief devices.  Completed projects to date required familiarization with European Union required “ATEX” electrical certification requirements and “PED” pressure certification design requirements. I&C Engineer August 2002 to February 2004 Jacobs Engineering /Cincinnati, Oh  Instrumentation and control system development and design.  FFB & Device Net skids and devices using DELTA V DCS, segments design and calculation.  Power distribution and calculation, electrical schematics, architecture diagrams and propagating control system circuits from field instruments into distributed control system (DCS) cabinets. Project Engineer Research Center of Technology/ Kaunas, Lithuania 1982 to 1999  Development mechanical conceptual design. Mechanical components design and manufacturing. Performing general layout diagrams for components, devised and documented assembly instructions, and produced maintenance drawings. Also created process assembly line drawings, including designs of specialized assembly equipment. Implemented new equipment test procedures and provided extensive technical support documentation within all project phases.  Development root cause analyzes of equipment failure. Driving the root cause process through the improvement and control, preventive actions to improve the final product reliability. Work Traits:  Experience working directly with customers  Strong team player. High personal energy and ability to energize others  Superior analytical skills  Excellent communicator  Ability to organize, assess, prioritize tasks, milestones and deliverables  Continuous strive for learning and personal development Education: Bachelors Degree of Science in Mechanical Engineering 1978-1982 Lithuania University of Technology/Dept. of Mechanical engineering (4 year accredited degree) Kaunas, Lithuania Skills:  Intergraph INtools (SPI): Extensive experience from project inception through to project completion. Training received from one of INtools’ original authors.  AutoCAD: Experience as a CAD-proficient designer exceeds 6 years using AutoCAD Software  Bentley MicroStation: Accumulated over 4 years experience detailing a wide scope of drawings and calling upon most features to develop accurate design results. Mark Lerman Contact Information: Address: 2919 State Court Suwanee, GA. 30024 Telephone: 770-841-2257 E-mail: marklerman@msn.com Personal Objective: To obtain an Engineer’s position that demands a diverse background with in-depth experience to fully utilize my skills in a challenging and professional environment. Background Summary: Solid engineering knowledge and extensive practical experience in the following areas:  Multiple engineering disciplines including electrical machinery design, instrumentation and control system, mechanical engineering.  Experience in various industrial applications including: Power Plant, Oil, Gas, Chemical Process, LNG, Wastewater Treatment, and Pharmaceutical.  Distributed power controls, environmental controls.  Gas Turbine and Steam Turbine design and operation.  Proficient computer skills including design and simulation tools, standard documentation and communication tools.  Strong written and verbal communication skills, presentation skills. Experience: I&C Engineer CH2M HILL / Lockwood Greene Engineering/Atlanta, Ga March 2007 to January 2010 January 2005 to March 2006 May1999 to August 2002  Instrumentation specifications. Performed support engineering through the creation and maintenance of an instrumentation database and through development of installation details, plot plans, wiring documentation, electrical schematics, and relay panel wiring diagrams.  Design, sizing, and requisition of process instrumentation, product & environmental analyzers, control valves and pressure safety relief devices.  Reviewed, verified and QA checked vendor packages. I&C Engineer Ames / Atlanta, Ga March 2006 to February 2007  Instrumentation & control system design: instrumentation specifications, control system circuits from field instruments into distributed control system (DCS) cabinets.  Design and implementation of control circuits, cables, junction boxes, control panel enclosures, cable schedule, creation and maintenance of supporting instrumentation databases and Instrumentation installation.  Reviewed, verified and QA checked vendor packages. I&C Engineer CBI/Chicago, IL, March 2004 to July 2004. CBI/Taylor,Tx August 2004 to December 2004  Control system design, control circuits, cables, junction boxes, control panel enclosures, electrical schematics, relay panel wiring diagrams and line/three line diagrams.  Creation and maintenance of supporting instrumentation databases.  Power distribution and calculation, architecture diagrams and propagating control system circuits from field instruments into distributed control system (DCS) cabinets.  Design, sizing, specification and requisition of process instrumentation, product & environmental analyzers, control valves and pressure safety relief devices.  Completed projects to date required familiarization with European Union required “ATEX” electrical certification requirements and “PED” pressure certification design requirements. I&C Engineer August 2002 to February 2004 Jacobs Engineering /Cincinnati, Oh  Instrumentation and control system development and design.  FFB & Device Net skids and devices using DELTA V DCS, segments design and calculation.  Power distribution and calculation, electrical schematics, architecture diagrams and propagating control system circuits from field instruments into distributed control system (DCS) cabinets. Project Engineer Research Center of Technology/ Kaunas, Lithuania 1982 to 1999  Development mechanical conceptual design. Mechanical components design and manufacturing. Performing general layout diagrams for components, devised and documented assembly instructions, and produced maintenance drawings. Also created process assembly line drawings, including designs of specialized assembly equipment. Implemented new equipment test procedures and provided extensive technical support documentation within all project phases.  Development root cause analyzes of equipment failure. Driving the root cause process through the improvement and control, preventive actions to improve the final product reliability. Work Traits:  Experience working directly with customers  Strong team player. High personal energy and ability to energize others  Superior analytical skills  Excellent communicator  Ability to organize, assess, prioritize tasks, milestones and deliverables  Continuous strive for learning and personal development Education: Bachelors Degree of Science in Mechanical Engineering 1978-1982 Lithuania University of Technology/Dept. of Mechanical engineering (4 year accredited degree) Kaunas, Lithuania Skills:  Intergraph INtools (SPI): Extensive experience from project inception through to project completion. Training received from one of INtools’ original authors.  AutoCAD: Experience as a CAD-proficient designer exceeds 6 years using AutoCAD Software  Bentley MicroStation: Accumulated over 4 years experience detailing a wide scope of drawings and calling upon most features to develop accurate design results. To obtain an Engineer’s position that demands a diverse background with in-depth experience to fully utilize my skills in a challenging and professional environment.

Engineer

Suwanee, GA